Parsch UK offer a wide range of drinking water hoses suitable for short term or temporary bypass applications. Our potable water hoses include WRAS and UK Regulation 31 approved options.
Aquaflex - UK Reg 31 and WRAS Approved Drinking Water Hose
Our Aquaflex potable water hose is a general purpose all synthetic
layflat delivery hose certified to BS 6920 WRAS Material Approval, and also approved for use in
public water supplies as per the Secretary of State's List of Approved products listing
56/4/1397, as published by the Drinking Water Inspectorate (DWI).
The hose is a two-component system consisting of a transparent polyurethane inner lining
and a synthetic polyester outer jacket. An additional blue NBR synthetic rubber exterior
coating with ribs is applied for ease of handling and further resistance to abrasion.
The Aquaflex UK Reg 31 and WRAS approved drinking water hose is primarily used by the Water Authorities and sub contractors involved in the water sector for the emergency bypass of mains water due to failed pipework. This heavy duty lay flat potable water hose provides a temporary supply of essential water to the public.
Aquaflex is the preferred choice of Regulation 31 approved hose by the Water Authorities due to its unique construction. Whilst it is a heavy duty hose, the difference between Aquaflex and the TPU hose is its extreme flexibility, which is crucial in the emergency deployment by the Network Response Teams.
Aquaflex is also a multi-purpose hose commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of potable water due to its WRAS approval.
If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.Hose Jacket:
The hose jacket is a 100% polyester high tenacity yarn with circular woven, warp threads 2 ply twisted, plain weave.
Hose Lining:
The hose lining and cover is a two-component system consisting of a transparent
polyurethane inner lining and a synthetic polyester outer jacket. The external coating
is a high quality ribbed NBR synthetic rubber, resistant to ozone and to external
contact with oil products. The lining guarantees a smooth surface and low friction loss.
Hose Lengths:
All standard lengths can be supplied from stock, however RHL specialise in the cutting
and assembly of non-standard lengths up to 100 metres long to satisfy customers
individual requirements.
Maximum loose hose length is 300 metres and is made to order.
The maximum change in length - 3% The maximum change in diameter - 3%
- The Aquaflex potable water hose has a working temperature range of up to 23°C.
- Approved to Regulation 31 under 56/4/1397.
- Approved to BS6920 WRAS Material - 2206532.
- It can be coupled with BS 336 Instantaneous, Storz or all international coupling
types wired-in for safety and security, with 1.6mm Stainless Steel wire.
TPU Reg 31 - Drinking Water Hose
Our TPU Reg 31 Potable Water Hose is designed specifically for the transfer of drinking water. This hose is used primarily by the Water Authorities and sub contractors but is also suitable for the transfer of drinking water for construction sites, public events and leisure activities.
This high quality, high abrasion resistant hose is designed specifically for providing emergency supply of clean potable water should normal service be interrupted. It is constructed with a strong circular woven jacket that allows the polyurethane to be extruded through the polyester ply weave which fully encapsulates the textile reinforcement making it robust and pliable. The external wall is highly resistant to abrasion, puncturing, oil, ozone, petrochemicals, ultra-violet light and weathering whilst in service.
The TPU Reg 31 Potable Water Hose is used primarily by the Water Authorities and sub contractors involved in the water sector for the emergency bypass of mains water due to failed pipework. This heavy duty lay flat potable water hose provides a temporary supply of essential water to the public.
If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.Hose Jacket & Lining:
The external wall is highly resistant to abrasion, puncturing, oil, ozone,
petrochemicals, ultra-violet light and weathering whilst in service.
Hose Lengths:
Standard lengths of 25m. Other lengths available upon request.
- The TPU Reg 31 Potable Water Hose has a working temperature range of -30°C to +80°C.
- Approved to Regulation 31 under 56/4/62.
- It can be coupled with BS 336 Instantaneous, Storz or all international coupling
types wired-in for safety and security, with 1.6mm Stainless Steel wire over
synthetic polyester hose guards.
Aquaman - WRAS Approved Drinking Water Hose
Our Aquaman WRAS approved heavy duty water hose is a general purpose layflat delivery hose complying with BS 6920 WRAS Material Approval. The hose is a high quality thermoplastic polyether based polyurethane (TPU) which is extruded through the weave giving a 'Unified' construction. This hose requires no drying after use.
Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.
The Aquaman heavy duty water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.
If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.Hose Jacket & Lining:
The hose jacket is a 100% polyester high tenacity yarn with circular woven warp and weft threads reinforced. The unified construction is made of a high quality thermoplastic polyether based polyurethane (TPU) extruded through the weave. The inner lining guarantees a smooth surface and low friction loss.
Hose Lengths:
All standard lengths can be supplied from stock, however Parsch UK specialise in the cutting and assembly of non-standard lengths to satisfy customers individual requirements.
The maximum change in length - 2%
- The Aquaman WRAS approved heavy duty water hose has a working temperature range of up to 23°C
- It complies with BS 6920 WRAS Material Approval.
- It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Aquaflex N - Drinking Water Hose
Our Aquaflex N drinking water hose is a general purpose all synthetic layflat delivery hose. The hose is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket.
Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.
The Aquaflex N drinking water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.
The Aquaflex N drinking water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.
If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.Hose Jacket:
The hose jacket is a 100% polyester high tenacity yarn with circular woven, multiple twisted warp, twill weave.
Hose Lining:
The hose lining and cover is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket. The lining guarantees a smooth surface and low friction loss.
Hose Lengths:
All standard lengths can be supplied from stock, however Parsch UK specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.
Maximum loose hose length is 300 metres and is made to order.
The maximum change in length - 3% The maximum change in diameter - 3%
- The Aquaflex N drinking water hose has a working temperature range of -30°C to +80°C
- It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire.
Aquaflex P - Drinking Water Hose
Our Aquaflex P drinking water hose is a general purpose all synthetic layflat delivery hose. The hose is a two-component system consisting of a white high quality synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. The hose is finally colour and polyurethane coated for extra abrasion resistance.
Its abrasion resistance properties provide contact resistance to oil, fuel and chemical products along with ozone weather resistance. The two component lining system guarantees a smooth surface and low friction loss for a long service life with minimal maintenance requirements and easy repair.
The Aquaflex P drinking water hose is characterised by its lightweight, flexible and kink resistant structure produced with very low twist and small coil diameter. It is a multipurpose hose suitable for a wide range of applications.
The Aquaflex P drinking water hose is principally used by the Utility Companies. However it is a multipurpose hose also commonly used within the shipboard and marine industry, on refineries and construction sites for the transfer of clean water.
If you are unsure of this products suitability for your requirements please contact one of our expert team for advice.Hose Jacket:
The hose jacket is a 100% polyester high tenacity yarn with circular woven, multiple twisted warp, twill weave. Colour and polyurethane coated for extra abrasion resistance.
Hose Lining:
The hose lining and cover is a two-component system consisting of a black SBR synthetic rubber inner lining and a synthetic polyester outer jacket, bonded together with NBR-synthetic adhesive. Resistant to ozone and to external contact with oil products. The lining guarantees a smooth surface and low friction loss.
Hose Lengths:
Parsch UK specialise in the cutting and assembly of non-standard lengths up to 100 metres long to satisfy customers individual requirements.
Maximum loose hose length is 300 metres and is made to order.
The maximum change in length - 3% The maximum change in diameter - 3%
- The Aquaflex P drinking water hose has a working temperature range of -30°C to +80°C
- It can be coupled with BS 336 Instantaneous, Storz or all international coupling types wired-in for safety and security, with 1.6mm Stainless Steel wire